Item
51205
4-1/2" Tiger X Flap Disc, Conical (TY29), Phenolic Backing, 40Z, 5/8"-11 UNC Nut
Tiger X 4.5 inch conical flap discs are designed for aggressive grinding and long life when used on steel and stainless steel. Tiger X holds nothing back with its industry-first X3 technology that combines an advanced anchoring system, dual flap design and engineered backing. The combination delivers fast grinding AND long disc life for increased productivity.
The type 29 conical disc shape maximizes surface contact when grinding between 15° – 35° for aggressive stock removal on flat surfaces while the 40 grit abrasive grain is best for edge beveling, chamfering, weld grinding, and blending with a right angle grinder. This disc offers a metal 5/8" - 11 nut that allows for quick changeovers and prevents the disc from sticking to the spindle.
Tiger X flap disc raises the bar for those who are driven to get the job done right and done fast.
The type 29 conical disc shape maximizes surface contact when grinding between 15° – 35° for aggressive stock removal on flat surfaces while the 40 grit abrasive grain is best for edge beveling, chamfering, weld grinding, and blending with a right angle grinder. This disc offers a metal 5/8" - 11 nut that allows for quick changeovers and prevents the disc from sticking to the spindle.
Tiger X flap disc raises the bar for those who are driven to get the job done right and done fast.
Application
Finishing
Grinding
Material Application
Stainless Steel
Steel
Compatible Tool
Right Angle Grinder
Features and Benefits
| Enhanced Worker Safety – Increased aggression lets professionals use less force to get equal or better results. This means less stress and reduced fatigue. |
| Contaminant-free (contains less than 0.1% Fe, S, Cl). |
| Combination of cotton and polycotton cloth backings provide consistent grinding without glazing. |
| Self-sharpening zirconia alumina (ZA) grains hold up under high temperatures and extreme pressure. |
| 5/8" 11 metal nut allows for quick spin-on, spin-off changeover and eliminates cross-threading or sticking to spindle due to heat build-up. |
| Phenolic backing prevents scratching of the workpiece. |
| Best on carbon steel, structural steel, stainless steel, and cast iron. |
Specifications
| ANSI standard | B7.1 |
| Application | Finishing, Grinding |
| Arbor Hole Size | 5/8"-11 UNC |
| Backing Plate Material | Phenolic |
| Brand | Weiler Tiger X |
| Color | Blue |
| Commodity Code | 6805 30 1000 - ABR W/ BASE NOT PAPER/TEXTILE |
| Compatible Tool | Right Angle Grinder |
| Country of Origin | MEXICO |
| Diameter | 4-1/2 IN |
| Flap Density | Standard Density |
| Grain Type | Ceramic, Zirconia Alumina |
| Grit | 40 |
| Industry | Fabrication, Pressure Vessel |
| Item UPC Code | 012382512057 |
| Material Application | Stainless Steel, Steel |
| Maximum RPM | 13000 |
| Product Type | Flap Disc - Tiger X |
| Prop 65 Warning Description | WARNING: This product can expose you to chemicals including Silica, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. |
| Sales Unit of Measure | Each/Pieces |
| Standard Pack Quantity | 10 |
| Wheel Type | Type 29 |